 |
    |
PF1041N - High Voltage Power Supply
PF1041P - High Voltage Power Supply
PF1042 - High Voltage Power Supply, Dynode Divider, and Tube Socket
PF1043 - High Voltage Power Supply, Dynode Divider, and Tube Socket
PF1053 Bench-top High Voltage Power Supply for Channeltrons® and PMTs
PF1054 Bench-top Dual Output High Voltage Power Supply for Channeltrons® and PMTs
Low Cost
Reliable
Up to 8 KV
Compact, Solid State Design
The BURLE PF1041N and PF1041P are small, low-cost solid-state power supplies capable of providing up to 1500 volts DC output at 1 milliampere.
The PF1041N is designed primarily for use with photomultipliers operating in the negative voltage mode; the PF1041P, for photomultipliers operating in the positive voltage mode. However, either can be used in any application requiring a stable, efficient, low-ripple power supply for output loads of up to 1.5 watts. A variable voltage, 0 to 10 volts DC, is needed for supply operation. High voltage output is proportional to DC input.
BURLE PF1042 and PF1043 are small, low-cost solid-state power supply assemblies designed for use with side-window photomultipliers such as the 931A. These devices have an integral voltage-divider network of approximately 5 megaohms, no by-pass capacitors, and an integral socket which fits all 28-mm (1 1/8 inch) diameter, 9-stage, side-window photomultipliers having small-shell submagnal bases.
BURLE PF1042 provides a regulated output voltage (-500 to -1250 volts) that may be controlled by either resistance or voltage programming.
The PF1043 provides an output voltage (0 to -1250 volts) that varies directly with input voltage.
Model PF1053 is a solid-state, Bench-top High Voltage Power Supply that can provide a DC output of up to 3KV DC and 1 mA. The output polarity can be set to either negative or positive via a front panel switch. This model offers high precision and stability in a compact, economical package which makes it ideal for many laboratory applications.
Model PF1054 is a solid-state, Bench-top Dual Output High Voltage Power Supply that can provide DC outputs of up to 8KV DC at 500 mA. The output polarity can be set to either negative or positive via a front panel switch. This model offers high precision and stability in a compact, economical package which makes it ideal for a wide variety of applications.
| To view BURLE specifications sheets you'll need the FREE Adobe Acrobat Reader to view the document. Click the Acrobat button on the right to get it now! |  |
Copyright 2008 BURLE TECHNOLOGIES, INC.
E-mail address: burlesls@burle.com